Physical, Barrier, Mechanical, and Biodegradability Properties of Modified Starch Films with Nut By-Products Extracts.
Starch-based films with phenolic extracts could replace the use of petroleum-based plastics. In this study, octenyl succinate starch (OSS) films with pecan nutshell extract (PSE) or hazelnut skin extract (HSE) were prepared. The water resistance, as well as the optical, physical, mechanical, and biodegradable properties of these films, were investigated. The PSE and HSE improved the water resistance (decreasing the solubility to 17% and increasing the contact angle to 96.80°) and UV-light barrier properties of the films. For PSE and HSE, as their concentrations increased, the film rigidity decreased since these extracts acted as plasticizers. Micrographs obtained by scanning electron microscopy (SEM) depicted a homogeneous surface as a result of extracts dispersion through the polymeric matrix and the interactions between the phenolic compounds (PC) of the extracts and the OSS. The phenolic extracts from nut by-products and octenyl succinic anhydride (OSA) starch could be used to develop films to replace the conventional plastics.
Composition, Physicochemical and Sensorial Properties of Commercial Plant-Based Yogurts.
The aim of this study was to determine the key physicochemical, sensory and quality attributes of plant-based yogurts made from soy, coconut, cashew, almond and hemp, including a dairy benchmark yogurt. The soy, coconut and cashew-based yogurts showed textural parameters comparable to the dairy yogurt, with firmness values of 0.46, 0.44, 0.51 and 0.36 N, respectively. Rheological analysis showed that one of the soy-based yogurts was similar to the dairy yogurt in terms of apparent viscosity, in addition to water-holding capacity (82.8% and 75.7%, respectively). Other plant-based yogurts, e.g., hemp, showed different rheological and textural parameters to the other plant-based products, relating this to the agar and rice starch components of the hemp formulation. The sensory analysis demonstrated that some plant-based yogurts were similarly appreciated to dairy-based products. This was due mainly to the presence of specific hydrocolloids, sweeteners and flavours in the formulations; for example, the acceptability of the soy- and dairy-based yogurts were identical (5.95). The results obtained in this study allowed identification of key quality attributes of plant-based yogurt products and highlighted relationships between such attributes and formulation, which can be exploited in future product development.
A Lateral Flow Strip Based on a Truncated Aptamer-Complementary Strand for Detection of Type-B Aflatoxins in Nuts and Dried Figs.
Type-B aflatoxins (AFB1 and AFB2) frequently contaminate food, especially nuts and fried figs, and seriously threaten human health; hence, it is necessary for the newly rapid and sensitive detection methods to prevent the consumption of potentially contaminated food. Here, a lateral flow aptasensor for the detection of type-B aflatoxins was developed. It is based on the use of fluorescent dye Cy5 as a label for the aptamer, and on the competition between type-B aflatoxins and the complementary DNA of the aptamer. This is the first time that the complementary strand of the aptamer has been used as the test line (T-line) to detect type-B aflatoxins. In addition, the truncated aptamer was used to improve the affinity with type-B aflatoxins in our study. Therefore, the lengths of aptamer and cDNA probe were optimized as key parameters for higher sensitivity. In addition, binding buffer and organic solvent were investigated. The results showed that the best pair for achieving improved sensitivity and accuracy in detecting AFB1 was formed by a shorter aptamer (32 bases) coupled with the probe complementary to the AFB1 binding region of the aptamer. Under the optimal experimental conditions, the test strip showed an excellent linear relationship in the range from 0.2 to 20 ng/mL with a limit of detection of 0.16 ng/mL. This aptamer-based strip was successfully applied to the determination of type-B aflatoxins in spiked and commercial peanuts, almonds, and dried figs, and the recoveries of the spiked samples were from 93.3%-112.0%. The aptamer-complementary strand-based lateral flow test strip is a potential alternative tool for the rapid and sensitive detection of type-B aflatoxins in nuts and dried figs. It is of help for monitoring aflatoxins to avoid the consumption of unsafe food.
Characterization of physico-chemical and bioactive properties of oils of some important almond cultivars by cold press and soxhlet extraction.
The oleic acid composition of almonds oils expressed by cold press varied from 73.56% in Cristomorto cultivar to 76.59% in Tuono while oleic acid in oils extracted by soxhlet method ranged from 71.86% in Cristomorto and 75.63% in Tuono cultivars. Also, oil from cold press extraction contained 19.51% and 21.86% linoleic acid for Ferragnes and Tuono almond cultivars, respectively, while 18.74 and 20.51% linoleic acid was recorded in Soxhlet extracted oil from Ferragnes and Tuono almonds, respectively. In addition, α-tocopherol contents of the oil samples varied significantly (p < 0.05) from 14.18 to 16.86 mg/100 g in Tuono and 15.71-17.96 mg/100 g in Ferragnes for cold-press and soxhlet extracted oils, respectively. β-Sitosterol composition of the oil obtained by cold press ranged from 157.94 (Tuono) and 171.68 mg/100 g (Cristomorto) while β-sitosterol content varied from 148.91 (Tuono) and 159.68 mg/100 g (Cristomorto) for oil extracted by Soxhlet method.
Sustainable approach to almond skin mediated synthesis of tunable selenium microstructures for coating cotton fabric to impart specific antibacterial activity.
Currently, the synthesis of nanostructured inorganic materials with tunable morphology is still a great challenge. In this study, almond skin extract was employed for the biogenic synthesis of selenium nanoparticles with tunable morphologies such as rods and brooms. The effects of various synthesis parameters on morphologies were investigated using UV-Visible spectroscopy and scanning electron microscopy (SEM) which indicated that selenium brooms (SeBrs) were best synthesized using almond skin extract and optimized conditions of SeO2, ascorbic acid, pH, incubation temperature and time. Based on these results, the mechanism of SeBrs synthesis is proposed as having involved four stages such as nucleation, self-assembly, Ostwald ripening, and decomposition. Further, the test of antibacterial activity together with minimum inhibitory concentrations and minimum bactericidal concentrations indicated the selective, specific and good activity against B. subtilis. In addition, in situ coating of SeBrs on cotton fabric and its investigation by SEM demonstrated successful coating. Evident from plate-based assay and study of growth kinetics, coated fabric exhibited excellent anti-B. subtilis activity which demonstrated that biogenic SeBrs can be employed to coat cotton fabrics that can be used in operation theatres to reduce the episodes of Bacillus related Bacteraemia.
Impact of Drying Method on the Evaluation of Fatty Acids and Their Derived Volatile Compounds in ‘Thompson Seedless’ Raisins.
Air- and sun-dried raisins from Thompson Seedless (TS) grapes were analyzed under GC/MS to evaluate fatty acids (FAs) and their derived volatile compounds, coming from unsaturated fatty acids oxidation. A total of 16 FAs were identified in TS raisins, including 10 saturated fatty acids (SFAs) and 6 unsaturated fatty acids (USFAs). The contents of C18:0, C15:0, and C16:0 among SFAs and C18:3, C18:2 and C18:1 in USFAs were significantly higher. Furthermore, USFAs such as C16:1 and C20:1 were only identified in air-dried raisins. The principal component analysis showed the increased content of FAs and FA-derived compounds were in air-dried and sun-dried raisins, respectively. Among FA-derived compounds, 2-pentyl furan, 3-octen-2-one, 1-hexanol and heptanoic acid were more potent. This study shows that air-drying is more favorable for the production of fatty acids (SFAs and USFAs), whereas sun-drying is more advantageous in terms of fatty acid-derived volatiles.
Influence of different cooking methods on the nutritional and potentially harmful components of peanuts.
This study investigated the comparative effects of boiling, roasting, deep-frying methods on the content of nutritional and potentially harmful components in peanuts. After cooking, the contents of total reducing sugar, sucrose, unsaturated fatty acids and almost all individual amino acids were reduced. Free methionine disappeared after heating processing, whereas fructose, starch, cis-palmitoleic acid and saturated fatty acids were increased in processed samples. Micronutrients including flavonoids and phenolic reduced significantly after boiling process but increased after roasting process. Both of frying and roasting promoted the formation of potentially harmful components including HMF, acrylamide and furan. The overall compositional difference between samples were further displayed and identified by a combination application of HCA and PCA, which showed that the roasting and frying process had a significant impact on the nutritional composition of peanuts.
Species Composition, Temporal Abundance and Distribution of Insect Captures Inside and Outside Commercial Peanut Shelling Facilities.
Insect populations were studied within two commercial peanut shelling facilities located in the southeastern United States. Commercially available pheromone/kairomone-baited dome traps and pheromone-baited flight traps were deployed throughout processing and shipping portions of the shelling plants and serviced weekly over one year. Lasioderma serricorne, Tribolium castaneum, Typhaea stercorea, Carpophilus spp., Plodia interpunctella and Cadra cautella were the most common captures across locations. Lasioderma serricorne made up 87% and 88% of all captures in dome traps in plants one and two, respectively. While L. serricorne was not captured during the winter months in flight traps, it was captured with near 100% frequency in dome traps, suggesting that populations persisted throughout the year inside the facilities. Tribolium castaneum populations were active year round. Across insect species and trap type, temperature was a significant covariate for explaining variation in insect counts. After accounting for the effect of temperature, there were always more insects captured in the processing portions of the facilities compared to the shipping areas. A negative linear relationship was observed between captures of L. serricorne and T. castaneum and trap distance from in-shell peanuts entering the shelling facilities. Conversely, fungivores were more evenly distributed throughout all parts of the shelling plants. These data suggest that management efforts should be focused where in-shell peanuts enter to reduce breeding and harborage sites for grain feeding insects.
Peanut oil cake-derived cellulose fiber: Extraction, application of mechanical and thermal properties in pineapple/flax natural fiber composites.
In this work peanut oil cake extracted Cellulose Micro Filler (CMF) is used for the advancement of mechanical and thermal properties in natural fiber composites. This fiber powder was used in enhancing the applications of Pineapple (P)/Flax (F) natural fiber epoxy composites. The X Ray Diffraction (XRD) results of CMF showed improved Crystalline Index (Crl) of 70.25° and crystalline size of 5.5 nm. FTIR results confirmed the rich cellulose content in functional groups of filler with peaks at 1058 cm-1, 1162 cm-1, 1370 cm-1 and 1428 cm-1. Mechanical results showed a positive impact with incorporation of CMF in PF hybrid fiber composites. Thermal stability results showed enhancement in the degradation temperature, residual %, endothermic peak and enthalpy by the incorporation of CMF. In the 30% PF combinations degradation temperature T50, T70, T70 enhanced from 387.73-391.08°, 434.81-454.81° and 468.91-553.36° by the filler substitution. Similarly residual % increased from 17.69-24.35%. The combination with 35% PF showed enhancement in degradation temperature, residual percentage, endothermic peak and enthalpy with filler addition up to 3%.
Hydroethanolic extract of Juglans regia L. green husks: A source of bioactive phytochemicals.
Juglans regia L. (walnut) green husks are an important fraction of waste resulting from the walnut production, thus representing an interesting natural matrix to explore as a source of bioactive compounds. In this work, the hydroethanolic extract of walnut green husks was studied considering the phytochemical composition and the biological activity using different cell model assays, most of them evaluated for the first time for this matrix. From the HPLC-DAD-ESI/MSn analysis, sixteen compounds were identified, being the extract mostly composed of naphthalene derivatives (including tetralone derivatives) and less abundant in phenolic compounds (hydroxycinnamic acids and flavonols). The cytotoxic potential of the extract was assessed against tumour (MCF-7, NCI-H460, HeLa and HepG2) and non-tumour (PLP2) cell lines. Moreover, the antioxidant activity of the extract was evaluated by inhibition of the oxidative haemolysis (OxHLIA) and the formation of thiobarbituric acid reactive substances (TBARS), and the anti-inflammatory potential by the inhibition of the NO production by the RAW264.7 cell culture. The antibacterial effects of the extract were also evaluated against Gram-negative and Gram-positive bacteria. The results obtained represent a stepping stone for the development of future applications using walnut green husks as a source of added value compounds with bioactive potential.