Dryland irrigation increases accumulation rates of pedogenic carbonate and releases soil abiotic CO2
Agricultural fields in drylands are challenged globally by limited freshwater resources for irrigation and also by elevated soil salinity and sodicity. It is well known that pedogenic carbonate is less soluble than evaporate salts and commonly forms in natural drylands. However, few studies have evaluated how irrigation loads dissolved calcium and bicarbonate to agricultural fields, accelerating formation rates of secondary calcite and simultaneously releasing abiotic CO2 to the atmosphere. This study reports one of the first geochemical and isotopic studies of such "anthropogenic" pedogenic carbonates and CO2 from irrigated drylands of southwestern United States. A pecan orchard and an alfalfa field, where flood-irrigation using the Rio Grande river is a common practice, were compared to a nearby natural dryland site. Strontium and carbon isotope ratios show that bulk pedogenic carbonates in irrigated soils at the pecan orchard primarily formed due to flood-irrigation, and that approximately 20-50% of soil CO2 in these irrigated soils is calcite-derived abiotic CO2 instead of soil-respired or atmospheric origins. Multiple variables that control the salt buildup in this region are identified and impact the crop production and soil sustainability regionally and globally. Irrigation intensity and water chemistry (irrigation water quantity and quality) dictate salt loading, and soil texture governs water infiltration and salt leaching. In the study area, agricultural soils have accumulated up to 10 wt% of calcite after just about 100 years of cultivation. These rates will likely increase in the future due to the combined effects of climate variability (reduced rainfall and more intense evaporation), use of more brackish groundwater for irrigation, and reduced porosity in soils. The enhanced accumulation rates of pedogenic carbonate are accompanied by release of large amounts of abiotic CO2 from irrigated drylands to atmosphere. Extensive field studies and modelling approaches are needed to further quantify these effluxes at local, regional and global scales. https://doi.org/10.1038/s41598-021-04226-3
Multipurpose plant species and circular economy: Corylus avellana L. as a study case.
Corylus avellana L. is one of the most cultivated species in the world. Mainly utilized with the purpose of obtaining food material, hazel trees cannot guarantee constant kernels productions given the threats related to pathogens and to adverse conditions, especially in a globalisation and global changes scenarios. This matter led us to consider the opportunity of using hazel tree in all its parts and for several purposes, due to its multifunctional characteristics. As a pioneer species, it is a precious plant useful for forest restoration purposes and for forest successions/wildlife facilitation. Its roots enter into symbiosis with truffles making this species exploitable for hazelnuts and truffles production. The precious elements contained in what is considered "waste" deriving from hazel crops (i.e., leaves, skins, shells, husks and pruning material), could be reused and valorised in the perspective of a circular economy that is opposed to a linear one. In particular, a list of several phenolic compounds detected in hazelnut shells has been reported in literature to prevent and delay many human diseases due to their antioxidant properties and to free radical scavenging activities, with implications potentially useful even in the fight against COVID-19. All this makes hazel crop by-products interesting to be valorised as a chemical compound source for human health, even more than a biomass fuel or for bio-char applications. The multiple possible uses of the hazel tree would lead to alternative productions than the only nut productions, avoiding significant economic losses, would decrease the cost of disposal of crops residues and would increase the sustainability of agro-ecosystems by reducing, among other things, the production of wastes and of greenhouse gases deriving from the usual burning of residues which often happens directly in fields. https://doi.org/10.31083/j.fbl2701011
Acute Toxicity of Fungicide-Insecticide-Adjuvant Combinations Applied to Almonds During Bloom on Adult Honey Bees.
Beekeepers report significant honey bee deaths during and after almond bloom. These losses pose a major problem for the California almond industry because of its dependence on honey bees as pollinators. This research aimed to determine if combinations of pesticides applied during almond bloom during daylight hours were a possible explanation for these losses. In the present study, we aimed to mimic the spray application route of exposure to pesticides by using a Potter Spray Tower to treat adult honey bees with commonly encountered pesticides and pesticide combinations at multiples of the maximum recommended field application rates. Tested insecticides included Altacor® and Intrepid® and tested fungicides included Tilt®, Pristine®, Luna Sensation®, and Vangard®. Synergistic toxicity was observed when the fungicide Tilt® (a.i. propiconazole) was applied with the insecticide Altacor® (chlorantraniliprole), though neither caused significant mortality when applied individually. The study also looked at the effect of adding a spray adjuvant, Dyne-Amic®, to pesticide mixtures. Dyne-Amic® was toxic to honey bees at concentrations above the maximum recommended field application rate and toxicity was increased when combined with the fungicide Pristine® (pyraclostrobin and boscalid). Addition of Dyne-Amic® also increased toxicity of the Tilt® and Altacor® combination. These results suggest that application of Altacor® and Tilt® in combination with an adjuvant at the recommended field application rates could cause mortality in adult honey bees. These findings highlight a potential explanation for honey bee losses around almond bloom, emphasize that the safety of spray adjuvants to bees should not be assumed, and provide support for recommendations to protect bees from pesticides through application at night when bees are not foraging. https://doi.org/10.1002/etc.5297
Effects of different artificial diets on commercial honey bee colony performance, health biomarkers, and gut microbiota.
Background: Honey bee colonies managed for agricultural pollination are highly dependent on human inputs, especially for disease control and supplemental nutrition. Hives are routinely fed artificial "pollen substitute" diets to compensate for insufficient nutritional forage in the environment. The aim of this study was to investigate the effects of different artificial diets in a northern California, US commercial beekeeping operation from August through February. This time period represents an extended forage dearth when supplemental nutrition is used to stimulate late winter colony growth prior to almond pollination in the early spring. A total of 144 honey bee colonies were divided into 8 feeding groups that were replicated at three apiary sites. Feeding groups received commercial diets (Global, Ultra Bee, Bulk Soft, MegaBee, AP23, Healthy Bees), a beekeeper-formulated diet (Homebrew), or a sugar negative control. Diets were analyzed for macronutrient and amino acid content then evaluated with respect to honey bee colony population size, average bee weight, nutrition-related gene expression, gut microbiota abundance, and pathogen levels. Results: Replicated at three apiary sites, two pollen-containing diets (Global and Homebrew) produced the largest colonies and the heaviest bees per colony. Two diets (Bulk Soft and AP23) that did not contain pollen led to significantly larger colonies than a sugar negative control diet. Diet macronutrient content was not correlated with colony size or health biomarkers. The sum of dietary essential amino acid deficiencies relative to leucine content were correlated with average bee weight in November and colony size used for almond pollination in February. Nutrition-related gene expression, gut microbiota, and pathogen levels were influenced by apiary site, which overrode some diet effects. Regarding microbiota, diet had a significant impact on the abundance of Bifidobacterium and Gilliamella and trended towards effects on other prominent bee gut taxa. Conclusions: Multiple colony and individual bee measures are necessary to test diet efficacy since honey bee nutritional responses are complex to evaluate. Balancing essential amino acid content relative to leucine instead of tryptophan may improve diet protein efficiency ratios. Optimization of bee diets could improve feed sustainability and agricultural pollination efficiency by supporting larger, healthier honey bee colonies. https://doi.org/10.1186/s12917-022-03151-5
Sustainable food systems and nutrition in the 21st century: a report from the 22nd annual Harvard Nutrition Obesity Symposium
Food systems are at the center of a brewing storm consisting of a rapidly changing climate, rising hunger and malnutrition, and significant social inequities. At the same time, there are vast opportunities to ensure that food systems produce healthy and safe food in equitable ways that promote environmental sustainability, especially if the world can come together at the UN Food Systems Summit in late 2021 and make strong and binding commitments toward food system transformation. The NIH-funded Nutrition Obesity Research Center at Harvard and the Harvard Medical School Division of Nutrition held their 22nd annual Harvard Nutrition Obesity Symposium entitled “Global Food Systems and Sustainable Nutrition in the 21st Century” in June 2021. This article presents a synthesis of this symposium and highlights the importance of food systems to addressing the burden of malnutrition and noncommunicable diseases, climate change, and the related economic and social inequities. Transformation of food systems is possible, and the nutrition and health communities have a significant role to play in this transformative process. https://doi.org/10.1093/ajcn/nqab315
Multivariate optimization and comparison between conventional extraction (CE) and ultrasonic-assisted extraction (UAE) of carotenoid extraction from cashew apple.
Carotenoids are an essential component of cashew and can be used in pharmaceuticals, cosmetics, natural pigment, food additives, among other applications. The present work focuses on optimizing and comparing conventional and ultrasound-assisted extraction methods. Every optimization step took place with a 1:1 (w:w) mixture of yellow and red cashew apples lyophilized and ground in a cryogenic mill. A Simplex-centroid design was applied for both methods, and the solvents acetone, methanol, ethanol, and petroleum ether were evaluated. After choosing the extractor solvent, a central composite design was applied to optimize the sample mass (59-201 mg) and extraction time (6-34 min). The optimum conditions for the extractor solvent were 38% acetone, 30% ethanol, and 32% petroleum ether for CE and a mixture of 44% acetone and 56% methanol for UAE. The best experimental conditions for UAE were a sonication time of 19 min and a sample mass of 153 mg, while the CE was 23 min and 136 mg. Comparing red and yellow cashews, red cashews showed a higher carotenoid content in both methodologies. The UAE methodology was ca. 21% faster, presented a more straightforward composition of extracting solution, showed an average yield of superior carotenoid content in all samples compared to CE. Therefore, UAE has demonstrated a simple, efficient, fast, low-cost adjustment methodology and a reliable alternative for other applications involving these bioactive compounds in the studied or similar matrix. https://doi.org/10.1016/j.ultsonch.2022.105980
Role of dehydration temperature on flavonoids composition and free-form volatile profile of raisins during the drying process
This study investigated the metabolic differences of 'Zicui' raisins produced at different drying temperatures (30 °C, 40 °C and 50 °C). Glucose, fructose, malic acid, shikimic acid and succinic acid contents were the highest in raisins dried at 50 °C. Compared with others, the drying temperature of 40 °C was more conducive to the accumulation of chalcones, dihydroflavones, dihydroflavonols, flavanols, flavonoid carbonosides, proanthocyanidins, and other phenols, while the drying temperature of 30 °C was more conducive to the accumulation of anthocyanins, flavonoid, and flavonols. Most volatile ketones and acids accumulated more in raisins produced at 30 °C, of which the content of 2,6-dimethyl-4-heptanone with sweet odour reached 70.34 μg/L, significantly higher than that in other raisins. Overall, the appropriate drying temperature should be selected according to the demand for specific nutritional or aromatic metabolites during raisins production. https://doi.org/10.1016/j.foodchem.2021.131747
A Detection Assay to Identify Alternative Food Sources of the Two-Spotted Stink Bug, Bathycoelia distincta (Hemiptera: Pentatomidae).
The two-spotted stink bug, Bathycoelia distincta Distant (Hemiptera: Pentatomidae), is a serious pest in South African macadamia orchards. This pest is predominantly controlled using insecticides, thus alternative control methods are essential. The stink bugs arrive as adults in the orchards, during the early nut set season, but little is known about their alternative plant hosts before their arrival. The aim of this study was to develop a PCR-based metabarcoding assay to identify plant material in the gut of B. distincta. Thereafter, the persistence of plant DNA in the gut, after switching food sources, was determined by rearing the stink bugs on Zea mays L. (Cyperales: Poaceae), transferring them to Macadamia sp. and then collecting insects at different time points. As a proof of concept, the assay was tested on insects collected from commercial macadamia orchards to determine if it can identify alternative food sources. The chloroplast gene markers, trnL and trnF, were most successful for plant DNA amplification. The time trial suggested that plant material can be detected 24 h after switching to the alternate food source and one of the samples still contained Z. mays DNA after five days. Various plant species were detected from the orchard collected samples, including known food sources of other stink bugs, such as tea plants (Camellia sinensis L. (Ericales:Theaceae)) and sunflowers (Helianthus annuus L. (Asterales: Asteraceae)). This study provides the first indication of potential alternative food sources of B. distincta. The assay developed in this study can now be implemented for large-scale field surveys to contribute to future integrated pest management strategies. https://doi.org/10.1093/jee/toab256
Targeted Lipidomics Analysis of Oxylipids in Hazelnut Oil during Storage by Liquid Chromatography Coupled to Tandem Mass Spectrometry.
Hazelnut oil is a high-grade edible oil with high nutritional value and unique taste. However, it is prone to oxidative degradation during storage. Herein, we used liquid chromatography coupled to tandem mass spectrometry to carry out a lipidomics analysis of the storage process of hazelnut oil. A total of 41 triacylglycerols and 12 oxylipids were determined. The contents of all oxylipids increased significantly after storage (p < 0.05). The oxylipid accumulation of hazelnut oil during storage was clarified for the first time. Nine significantly different oxylipids were further screened out. It was considered that the 15th day of storage is the dividing point. In addition, the lipoxygenase-catalyzed oxidation may be the major contributor to lipid oxidation of hazelnut oil. This study provides a new insight and theoretical basis to explore the storage oxidation mechanism of hazelnut oil and take quality control measures. https://doi.org/10.1021/acs.jafc.1c06811
The Effect of Microwave Irradiation on the Representation and Growth of Moulds in Nuts and Almonds
Microwave (MW) irradiation is a non-destructive method that can be applied as an alternative method to inhibit the growth of microorganisms. The present study evaluated the effect of MW irradiation on the occurrence of moulds in nuts and almonds. Samples of unshelled natural almonds, pistachios, and in-shell peanuts were treated with different doses of MW irradiation (2400-4000 W). The effect of MW irradiation on mould counts was evaluated by cultivating immediately after irradiation and after 3 and 6 months of storage. The most represented genera in all analysed samples were Aspergillus (68%), Penicillium (21%), and a small amount of Cladosporium (3%). Mould numbers significantly decreased after MW treatment. The treatments with MW irradiations at 3000 and 4000 W significantly reduced the mould colony counts, and their effect persisted during storage; irradiation at 2400 W was partially effective. The strongest effect of MW irradiation was observed in in-shell peanuts. MW irradiation seems to be a promising method for maintaining the microbiological quality of nuts. https://doi.org/10.3390/foods11020221